Series

A new 3D view can be set up by going to the *New module. Additional series can also be added to existing 3D views.

To add a series:

  1. Make sure that view area of the 3D view that you would like to change is currently active.
  2. Open Analysis Window->Page Settings->Configure Page
  3. Click Add and with the drop down box select either points or surveys.
  4. Fill in the required Data Inputs. Namely, the Table, Filter, ID and Location.
  5. Input a Series Name.
  6. Save the view (or if the view is new “save as” in an appropriate module.)

Please note:

1. the ID must be of Type ID, while the Location must be of points type, i.e. a location vector consisting of 3 points. If the location is not a vector but defined by three number columns, these can be combined into a vector, using the Calculation module in mXrap.  Refer to the example section for more detail.

2. Now both X and Y axises support displaying date.

3. The new series will now be visible in the series list in Analysis Window->Panel->Page Settings (3D view). To view the Series the “Plot markers as:” option must be enabled with an appropriate marker style selected.  

4. Refer to Point Series Settings for more information on displaying and changing attributes of point series data.

The display order of the series in the Analysis Window->Panel->Page settings can be changed by using the Up/Down buttons and series can be removed by using the removed button.

General method for creating a 3D view.        

Created with the Personal Edition of HelpNDoc: Free CHM Help documentation generator