Skip to main content

Client Deployment Guide

This guide covers the complete process for deploying mXrap on client machines.

Prerequisites​

System Requirements​

Operating System​

Hardware​

  • RAM: 16GB minimum
  • Processor: x86-64 (Intel or AMD) - ARM devices not supported
  • Graphics:
    • OpenGL 4.0+ compatible graphics card
    • Updated graphics drivers
    • Discrete GPU or APU recommended (integrated Intel graphics may cause issues)

Access Requirements​

Shared data storage​

The user must have write access to the 'root folder' where mXrap data is stored. Common locations for the root folder are:

  • Local disk drive (single-user installations)
  • Corporate network folder (single/multi-user installations)
  • Shared folder on another engineer's computer (multi-user installations)
  • Shared folder on ESG server (when ESG server cannot access corporate network)

Seismic data sources​

  • IMS Seismic Data: Read access to IMS network drive for .msrap*evp files
  • ESG Seismic Data: Access to root folder (data exported directly by ESG server)

Installation Process​

Software Installation​

  1. Head to Downloads and download the necessary installers. You will need mXrap and CodeMeterRuntime to start using mXrap. The username and password to access the downloads will have been sent to you during setup - email if you don't have them.

  2. Install CodeMeterRuntime.exe. This small application will allow your PC to communicate with the mXrap licence servers. The installation options should be left as default.

  1. Install mXrap with the default installation options. This does not require admin privileges and installs to %localappdata%. This will install 3 new applications, which can be found in the Start Menu.

Installation Options​

  • Default: Per-user installation
  • All-users: Run msiexec /i mXrap_installer.msi ALLUSERS=1 from an elevated command prompt
  • Enterprise: MSI supports group policy deployment

Licence Server Configuration​

Prerequisites​

  1. Ensure licence server is configured (see IT Installation Guide)
  2. Install CodeMeter Runtime

Setup Process​

Open About mXrap and click on Licence Servers.

Licence Servers Interface
Licence Servers Interface
  • CodeMeter WebAdmin: Access the Wibu CodeMeter WebAdmin interface
  • Check Licences: Force the runtime to refresh licence status

Configure your network licence server connection using the following options:

ActionDescription
Choose FileSelect a plain text file containing server addresses (IP, hostname, or URL) - one per line
ClearRemove file reference (file remains on disk)
Edit ContentOpen the selected file in your default text editor

Example server configuration file:

licence-servers.txt
555.555.5.555
server.company.com
hostname
ActionDescription
Manual SetDirectly enter your network licence server IP/URL/hostname
Install Online LicenceConfigure online licensing - see Online Licence Setup
CloseClose the configuration window

Post-Installation​

Verification Steps​

  • mXrap launches successfully
  • Licence is valid and up-to-date
  • Data sources are accessible
  • Graphics rendering works correctly

Support​

Remote assistance is available for:

  • Data gathering and restructuring
  • System configuration audit
  • Troubleshooting installation issues

You can also email at any time for assistance.

Last updated on